Security Menu - HP EliteBook 2730p Maintenance And Service Manual

Computer Setup

Security menu

✎
Some of the menu items listed in this section may not be supported by your computer.
Select
User Management (requires an
administrator password)
Password Policy (requires an
administrator password)
Allow HP SpareKey Enrollment
HP SpareKey Enrollment
HP SpareKey
Fingerprint Reset on Reboot (If Present)
Change Password
DriveLock Passwords
Automatic DriveLock
TPM Embedded Security (requires an
administrator password)
Disk Sanitizer
System IDs
Setup BIOS Administrator Password
Always Prompt for HP SpareKey Enrollment
5–4
To do this
■ Create a new BIOS user account.
■ View a list of ProtectTools users.
Revise password policy criteria.
Enable/disable permission to enroll or reset HP SpareKey.
Enroll or reset HP SpareKey, which is a set of security questions and answers
used if you forget your password.
Enable/disable HP SpareKey (enabled by default).
Enable/disable the fingerprint reader (select models only; disabled by default).
Enter, change, or delete a BIOS administrator password.
■ Enable/disable DriveLock on any computer hard drive (enabled by default).
■ Change a DriveLock user password or master password.
✎
DriveLock settings are accessible only when you enter Computer Setup
by turning on (not restarting) the computer.
Enable/disable Automatic DriveLock support.
■ Change TPM (Trusted Platform Module) Embedded Security device state at
restart. The following options are available:
❐ Do Nothing (enabled by default)
❐ Available and Disabled
❐ Available and Enabled
❐ Factory Defaults
■ Reset Authentication Credential.
■ Enable/disable support for the following:
❐ Power-on authentication support (enabled by default)
❐ Operating system TPM management (enabled by default)
❐ Reset of TPM from operating system (disabled by default)
Run Disk Sanitizer to destroy all existing data on the primary hard drive or the
drive in the upgrade bay.
Ä
If you run Disk Sanitizer, the data on the selected drive is
destroyed permanently.
Enter a user-defined computer asset tracking number and ownership tag.
Set up a BIOS administrator password.
Enable/disable a prompt for HP SpareKey enrollment.
Maintenance and Service Guide