Turning The Beep Tone On/Off - Accu-Chek Compact Plus User Manual

If this happens, you have to reset the year, time and date so that you
can clearly distinguish between test results. If you do not set the year,
time and date, a series of zeros (0:00 and 0-00) will be displayed when-
ever you perform a test instead of the time and date, and your future re-
sults will be saved without the year, time and date. In this case the test
results saved in memory will be numbered consecutively so you can still
recognize the order in which they were saved.
Statistical evaluations such as calculating average values (see Chapter
5 "Using the Accu-Chek Compact Plus meter as an electronic note-
book") and computer downloads (see Chapter 5.4 "Downloading test
results to a PC, handheld computer or printer") are only possible with
results saved together with the year, time and date.
If you lose the year, date and time settings, the meter returns to the
following settings:
Year: year of manufacture 20XX, e.g. 2005
Time: 0:00 or 12:00 a.m., depending on the time/date format you
had selected previously
Date: 1-01 as day-month (D-MM) or month-day (M-DD), depending
on the time/date format you had selected previously.
40
3.1

Turning the beep tone on/off

With the beep tone turned on, the meter beeps
to ask you to apply blood or control solution,
when you have applied sufficient blood or control solution and the
test commences,
when it displays the result,
each time it displays an error message.
With the meter turned off, press the S button.
The meter turns on without advancing a test strip.
The symbol for the beep tone and On 1 flash in the display.
Settings Settings
3
41