Opening The System Unit - HP 2240 Owner's Manual

Opening the
System Unit
B-6
Perform the following steps to open the system unit:
1.
Power off the system, the monitor, and any peripheral devices.
Unplug the system unit power cord and the power cord of any
peripheral devices from ac wall outlets. Refer to Using Your HP
Workstation for the proper method of shutting down your work-
station.
2.
Attach the static-grounding wrist strap by following the instruc-
tions on the package. Attach the sticky end of the wrist strap to
bare metal on the back panel of the system unit.
3.
Press down on the two buttons on the top front of the worksta-
tion, releasing the front panel (also known as the front bezel) as
shown in Figure B–1.