Electrostatic
Discharge (ESD)
Precautions
Visible LEDs
Electrostatic charges can damage the integrated circuits on printed
circuit boards. To prevent such damage from occurring, observe the
following precautions during board unpacking and installation:
Stand on a static-free mat.
Wear a static strap to ensure that any accumulated electrostatic
charge is discharged from your body to ground.
Connect all equipment together, including the static-free mat,
static strap, routing nodes, and peripheral units.
Keep uninstalled printed circuit boards in their protective anti-
static bags.
Handle printed circuit boards by their edges, once you have re-
moved them from their protective antistatic bags.
The Visible LED on this product is classified as "Class 1 LED
PRODUCT" in accordance with EN 60825–1.
A-5