Selecting from the Security Menu
Select
Setup Password
Power-on Password
DriveLock Passwords
Password Options
(Password options can be
selected only when a
power-on password has
been set.)
Device Security
System IDs
*Not applicable to SuperDisk LS-120 drives.
Maintenance and Service Guide
Table 2-2
Security Menu
To Do This
Enter, change, or delete a Setup password.
The Setup password is called an administrator
password in Computer Security, a program
accessed from the Windows Control Panel.
Enter, change, or delete a power-on password.
Enable/disable DriveLock; change a DriveLock
User or Master password.
✎
DriveLock Settings are accessible only
when you enter Computer Setup by turning
on (not restarting) the notebook.
Enable/disable:
■ QuickLock
■ QuickLock on Standby
■ QuickBlank
✎
To enable QuickLock on Standby or
QuickBlank, you must first enable
QuickLock.
Enable/disable:
■ Ports or diskette drives*
■ Diskette write*
■ CD-ROM or diskette startup
✎
Settings for a DVD-ROM can be entered in
the CD-ROM field.
Enter identification numbers for the notebook,
a port replicator, and all battery packs in
the system.
Troubleshooting
2–5