Removal And Replacement Preliminaries; Tools Required; Service Considerations - HP Laptop Docking Station Maintenance And Service Manual

Removal and Replacement
This chapter provides essential information for proper and safe
removal and replacement service.

4.1 Tools Required

You will need the following tools to complete the removal and
replacement procedures:
■
Magnetic screwdriver
■
Phillips P0 screwdriver
■
5.0-mm hex socket for system board standoffs
■
Flat-bladed screwdriver
■
Tool kit (includes connector removal tool, loopback plugs,
and case utility tool)

4.2 Service Considerations

The following sections include some of the considerations that
you should keep in mind during disassembly and assembly
procedures.
✎
As you remove each subassembly from the docking base, place
the subassembly (and all accompanying screws) away from the
work area to prevent damage.
Maintenance and Service Guide
Preliminaries
4
4–1