Removal and replacement procedures
7. If it is necessary to replace the display bezel or any of the display assembly internal components, remove the
following screw covers and screws: Two rubber screw covers on the display bezel bottom edge 1. Two
Phillips PM2.5×6.5 screws 2. The display rubber screw covers are included in the Display Rubber Kit, spare
part number 512361-001.
8. Flex the inside edges of the top edge 1, the left and right sides 2, and the bottom edge 3 of the display bezel
until the bezel disengages from the display enclosure.
9. Remove the display bezel 4. The display bezel is available using spare part number 512364-001.
4–26
Maintenance and Service Guide