Multi Board - HP PAVILION 311 Maintenance And Service Manual

Multi board

Description
Multi board (includes USB and RJ-45 ports, and cable)
Multi board for use the with the HP Pavilion (includes USB and RJ-45 ports, and cable)
Before removing the multi board, follow these steps:
1. Shut down the computer. If you are unsure whether the computer is off or in Hibernation, turn the computer on,
and then shut it down through the operating system.
2. Disconnect all external devices connected to the computer.
3. Disconnect the power from the computer by first unplugging the power cord from the AC outlet, and then
unplugging the AC adapter from the computer.
4. Remove the battery (see
5. Remove the following components:
a. Accessory compartment cover (see
b. Hard drive (see
c. Keyboard (see
d. Top cover (see
e. Display assembly (see
Remove the multi board:
1. Disconnect the multi board cable 1 from the system board.
2. Remove the 2 Phillips PM2.0×5.0 screws 2 that secure the multi board to the base enclosure.
3. Remove the multi board 3 and cable.
Reverse this procedure to install the multi board.
Maintenance and Service Guide
"Battery" on page
"WLAN module" on page
"Hard drive" on page 4-18)
"Keyboard" on page 4-21)
"Top cover" on page 4-24)
"Display assembly" on page
4-7).
4-9)
4-31)
Removal and replacement procedures
Spare part number
580066-001
591994-001
4–37