5.9 LED Board
LED board (includes cable)
1. Prepare the notebook for disassembly (refer to
2. Remove the switch cover (refer to
3. Remove the three PM2.0×3.0 screws 1 that secure the LED
board to the switch cover.
4. Remove the LED board 2.
5. Release the ZIF connector 3 to which the LED board cable
is connected and disconnect the cable 4.
Removing the LED Board
Reverse the above procedure to install the LED board.
Maintenance and Service Guide
Spare Part Number Information
Removal and Replacement Procedures
Section
378772-001
Section
5.3).
5.8).
5–21