HP OmniBook 6000 Service Manual
  1. Manuals
  2. Brands
  3. HP Manuals
  4. Laptop
  5. OmniBook 6000
  6. Service manual

HP OmniBook 6000 Service Manual

Hewlett-packard laptop pc service manual
Hide thumbs Also See for OmniBook 6000:
Table of Contents

Advertisement

Quick Links

Download this manual See also: Reference Manual, Installation Manual
®
HP OmniBook 6000

Service Manual

For other Service and User Manuals, go to www.ManualDepot.com

Advertisement

Table of Contents
loading

Related Manuals for HP OmniBook 6000

Summary of Contents for HP OmniBook 6000

  • Page 1: Service Manual

    ® HP OmniBook 6000 Service Manual For other Service and User Manuals, go to www.ManualDepot.com...
  • Page 2 U.S. trademarks of Intel Corporation. TrackPoint™ is a U.S. trademark of International Business Machines. Adobe® and Acrobat® are trademarks of Adobe Systems Incorporated. All certifications may not be completed at product introduction. Check with your HP reseller for certification status.

  • Page 3: Table Of Contents

    Removing the CPU Module (HP Authorized Service Providers Only)... 2-18 Removing the Top Case (HP Authorized Service Providers Only)... 2-20 Removing the Motherboard or Bottom Case (HP Authorized Service Providers Only) ... 2-22 Replacing the Motherboard ... 2-24 Replacing the Bottom Case... 2-27 Repairing the BIOS IC (HP Authorized Service Providers Only)...
  • Page 4 Figure 2-20. Example of Serial Number Label ...2-27 Figure 2-21. Boot-Block Jumper...2-29 Figure 3-1. Basic Troubleshooting Steps ...3-2 Figure 3-2. OmniBook Diagnostic Screens — Basic and Advanced ...3-14 Figure 3-3. Serial and Parallel Loopback Connectors...3-16 Figure 4-1. Exploded View ...4-2 HP OmniBook 6000...
  • Page 5 Table 3-7. BIOS Setup Menus and Parameters ... 3-27 Table 4-1. OmniBook Replaceable Parts ... 4-3 Table 4-2. Accessory Replaceable Parts... 4-5 Table 4-3. Part Number Reference ... 4-6 Table 5-1. OmniBook 6000 LCD Guidelines (14.1/15.0” TFT, XGA) ... 5-3 HP OmniBook 6000...
  • Page 6 Introduction This manual provides reference information for servicing the HP OmniBook 6000. It is for use by HP-authorized service personnel while installing, servicing, and repairing these products. The manual is designed as a self-paced guide that will train you to install, configure, and repair OmniBook 6000 computers.

  • Page 7: Product Information

    The HP OmniBook 6000 provides outstanding performance and expandability, in a conveniently portable form. Its high-performance components use the latest technologies to enable it to replace a desktop computer or serve as a portable multimedia presentation tool. Table 1-1. OmniBook 6000 Series Models...

  • Page 8: Table 1-2. Product Comparisons

    Up to 16M colors (XGA). Zoomed Video enabled. Windows 95, Windows 98, Windows NT, or Windows 2000 preinstalled. DMI 2.0. HP TopTools 2.6 to 4.5. APM 1.2. ACPI compliant. On, Display-off, Standby, Hibernate, Off. OmniBook 900B Pentium III (450, 500, 600/500, or 650/500 MHz).

  • Page 9: Features

    8. Main status lights (left to right): power state, hard disk activity, charging status for main battery, and charging status for secondary battery. 9. Module eject latch. HP OmniBook 6000 Figure 1-1. OmniBook — Front View 10. System-off switch. 11. Audio-off button and audio-off light.

  • Page 10: Figure 1-2. Omnibook - Lower View

    26. Mini-PCI cover (no user parts inside). 27. SDRAM cover. Figure 1-3. OmniBook — Rear View 32. Serial port (COM1). Use this port for a serial mouse, modem, printer, or other serial device. 33. External monitor port. 34. ac adapter jack. HP OmniBook 6000...

  • Page 11: Operation

    Shut down (off) Saves maximum power. Turns off without saving current session. At startup, resets everything, starts a new session, and restores network connections. HP OmniBook 6000 Table 1-3. Activating Power Modes To enter this mode Allow timeout. Press blue sleep button –or–...

  • Page 12: Checking The Status Of The Omnibook

    Amber: The ac adapter is connected and the battery is charging. Red. The battery has a fault. Off: The ac adapter is not connected, a secondary battery is not installed, or the battery is not charging. Table 1-5. Keyboard Status Lights HP OmniBook 6000...

  • Page 13: Using Fn Hot Keys

    Lock is on, then the numeric functions are active; otherwise, cursor control is active. Fn+F12 Enters Hibernate mode. Fn+NumLock Toggles Scroll Lock on and off. Fn+UP ARROW Increases sound volume. Fn+DOWN ARROW Decreases sound volume. HP OmniBook 6000 Table 1-6. Fn Hot Keys Product Information...

  • Page 14: Resetting The Omnibook

    To boot from a CD-ROM or DVD drive in the module bay, insert a bootable CD (such as the Recovery CD ) into the drive, then reboot. Press ESC twice during reboot when the HP logo and prompt appear, then select the CD-ROM/DVD drive as the temporary boot device.

  • Page 15: Specifications

    Specifications The following tables list the specifications for the OmniBook and its accessories. These are subject to change: for the latest versions, see the HP Notebook Web site (www.hp.com/notebooks). Table 1-7. OmniBook 6000 Series Specifications Size (14.0-inch display): 316 × 261 × 33 mm (12.4 × 10.3 × 1.3 in).
  • Page 16 Advanced Power Management (APM) (Windows 95 and 98 only). DMI with HP TopTools. HP e-center (North America English only). Adobe Acrobat Reader. Agaté Tioman for HP (Hot Swap) (Windows 95 and 98 only). QuickLink (Windows 98 only). DiagTools. VirusScan. Online Reference Guide .
  • Page 17 Major ICs South Bridge: PIIX4M. Display controller: ATI Mobility M or M1. Audio controller: ESS Maestro-3E and ESS ES1921. CardBus controller: TI PCI 1420. Keyboard/embedded controller: National PC87570. BIOS flash: SST28SF040. Super I/O: National NS97338. HP OmniBook 6000 Product Information 1-11...

  • Page 18: Table 1-8. Omnibook 6000 Series Accessories

    Table 1-8. OmniBook 6000 Series Accessories Accessory Description Memory F1456B 32-MB SDRAM (100 MHz) expansion module F1457B 64-MB SDRAM (100 MHz) expansion module F1622B 128-MB SDRAM (100 MHz) expansion module F1654A 256-MB SDRAM (100 MHz) expansion module Hard Drives F2016A...

  • Page 19: Internal Design

    (speakers, touch pad, click buttons) Mini-PCI Card Mini-PCI Panel PCMCIA PCMCIA Socket Cards Hard Disk Drive Main Battery HP OmniBook 6000 Display Assembly Display Interface PCA Motherboard PCA Plug-In Module or Figure 1-5. Replaceable Module Diagram SDRAM Module Heatsink (fan) module...

  • Page 20: Table 1-9. Functional Structure

    Main status LEDs. I/O controller, serial connector. I/O controller, parallel connector. I/O controller, infrared transmitter/receiver. Keyboard controller (part of power supply PCA), PS/2 connector. Bus controller (South Bridge), USB connector. Docking logic, docking connector. PCMCIA controller. PCMCIA connectors. HP OmniBook 6000...

  • Page 21: Removal And Replacement

    Installing a wrong-size screw can damage the unit. (The symbol at the left represents an M2.5×5mm T-head screw.) HP OmniBook 6000 Removal and Replacement Table 2-1. Removal Cross-Reference Doors, PCMCIA (page 2-24).

  • Page 22: Disassembly Flowchart

    Figure 2-1. Disassembly Flow * Only if removing top case, motherboard, or bottom case. CPU module CMOS battery Hinge covers PCMCIA socket Display interface PCA Power supply PCA Volume PCA Mini-PCI panel Vent panel Sound/IR panel Docking doors PCMCIA doors HP OmniBook 6000...

  • Page 23: Table 2-2. Required Equipment

    Small flat-blade screwdriver. IC (PLCC) removal tool (similar to OK Industries EX-5). Screw Thread Size M2.5 (2–11 mm long) M2.5 (12–19 mm long) HP OmniBook 6000 Table 2-2. Required Equipment Table 2-3. Recommended Screw Torques Torque (cm-kgf) 1.3 – 1.8 3.0 –...

  • Page 24: Removing The Battery (User-Replaceable)

    Insert the front (rounded) end of the battery into the battery compartment on the bottom of the computer, and lower the back end in until it clicks into place. Removal and Replacement Figure 2-2. Removing the Battery HP OmniBook 6000...

  • Page 25: Removing A Plug-In Module (User-Replaceable)

    1. Press the button on the module release latch, and slide the latch toward the front of the computer. 2. Grasp the module and pull it out. HP OmniBook 6000 Figure 2-3. Removing a Module Figure 2-4. Removing a Module...

  • Page 26: Removing An Sdram Module (User-Replaceable)

    Removing an SDRAM Module (User-Replaceable) The OmniBook 6000 has no SDRAM on its motherboard, but has two slots for that hold two SDRAM modules. One slot contains a SDRAM module installed at the factory. Table 2-4. SDRAM Module Replacement Part Numbers...

  • Page 27: Removing The Hard Disk Drive (User-Replaceable)

    5. Notice that the hard drive has a pin connector attachment at one end. Carefully remove this connector from the end of the drive. Work alternately at each end so that the connector slides off evenly without bending the connector pins. HP OmniBook 6000 Part Number 0950-3825...

  • Page 28: Figure 2-7. Removing The Hard Disk Case

    1. Plug in the ac adapter. 2. Insert the Recovery CD in the CD-ROM drive. 3. Shut down and restart the computer. When you see the HP logo, press ESC twice. 4. Select the CD or DVD drive as the boot device.

  • Page 29: Removing The Mini-Pci Card (User-Replaceable)

    3. Release the latches at the sides of the board, so that the free edge of the board pops up. 4. Detach all the cables from the board. 5. Gently pull the board out of its connector. HP OmniBook 6000 Part Number F2072-60902 F2072-60903 Figure 2-8.
  • Page 30 Reassembly Notes Gently press the mini-PCI card into the connector at about a 30° angle, until it is fully inserted. Then press down on both sides until the latches snap closed. 2-10 Removal and Replacement HP OmniBook 6000...

  • Page 31: Removing The Power Button Panel (User-Replaceable)

    3. Insert a thumb or finger under the center of the panel, and lift the panel out. Figure 2-9. Removing the Power Button Panel Reassembly Notes Insert the left end of the panel into the top case, and press the panel into place. HP OmniBook 6000 Removal and Replacement 2-11...

  • Page 32: Replacing Small Parts (User-Replaceable)

    Insert a small flat-blade screwdriver under the foot and pry it loose. To replace, firmly Feet, rubber (on press the adhesive side of the foot into the recess. bottom of unit) 2-12 Removal and Replacement HP OmniBook 6000...

  • Page 33: Removing The Display Assembly (Hp Authorized Service Providers Only)

    Removing the Display Assembly (HP Authorized Service Providers Only) Required Equipment Small Phillips screwdriver. Removal Procedure 1. Unplug the ac adapter, if present, and remove the battery. Remove the secondary battery if one is installed. 2. Remove the power button panel (page 2-11).

  • Page 34: Figure 2-10. Removing The Display

    If you change the DIP switches, you must also reprogram the EEPROM for the new display— see page 2-26. If the EEPROM is not programmed correctly, the display will not turn on. 2-14 Removal and Replacement Figure 2-10. Removing the Display Screws, M2.5×6mm (5) HP OmniBook 6000...

  • Page 35: Removing The Keyboard (Hp Authorized Service Providers Only)

    Removing the Keyboard (HP Authorized Service Providers Only) Required Equipment Small Phillips screwdriver. Removal Procedure 1. Unplug the ac adapter, if present, and remove the battery. Remove the secondary battery if one is installed. 2. Remove the power button panel (page 2-11).

  • Page 36: Figure 2-12. Unplugging The Keyboard Cables

    Lay the keyboard face down on the top case slightly forward of its normal position, then reconnect the keyboard and pointing stick flex cables. Slip the metal tabs on the bottom of the keyboard into their slots in the top case, then lower the keyboard into place. 2-16 Removal and Replacement HP OmniBook 6000...

  • Page 37: Removing The Heatsink (With Fan) (Hp Authorized Service Providers Only)

    Removing the Heatsink (with Fan) (HP Authorized Service Providers Only) Required Equipment Small Phillips screwdriver. Removal Procedure 1. Unplug the ac adapter, if present, and remove the battery. Remove the secondary battery if one is installed. 2. Remove these additional assemblies: Power button panel (page 2-11).

  • Page 38: Removing The Cpu Module (Hp Authorized Service Providers Only)

    Removing the CPU Module (HP Authorized Service Providers Only) Table 2-8. CPU/Motherboard Component Compatibility Pentium III models CPU module F1979-69101 (600/500 MHz) F1980-69101 (650/500 MHz) F2072-69102 (700/600 MHz) PCA, motherboard F2072-60913 Required Equipment Small Phillips screwdriver. Small flat-blade screwdriver. Removal Procedure 1.

  • Page 39: Figure 2-14. Removing The Cpu Module

    The settings to use depend on the “Q” batch number printed on the upper surface of the CPU. The following settings are for batch number Q49: 1: ON 2: ON 3: ON For other batch numbers, see the appropriate Service Note. HP OmniBook 6000 4: OFF 5: ON 6: not used Removal and Replacement CPU module...

  • Page 40: Removing The Top Case (Hp Authorized Service Providers Only)

    Removing the Top Case (HP Authorized Service Providers Only) Required Equipment Small Phillips screwdriver. Removal Procedure 1. Unplug the ac adapter, if present, and remove the battery. Remove the secondary battery if one is installed. 2. Remove these additional assemblies: Power button panel (page 2-9).

  • Page 41: Figure 2-15. Removing The Top Case

    Caution Be careful not to pinch the speaker wires when reinstalling the nearby retaining screws. HP OmniBook 6000 Cover, left corner Screws, M2.5x4mm (2) Figure 2-15.

  • Page 42: Removing The Motherboard Or Bottom Case (Hp Authorized Service Providers Only)

    Removing the Motherboard or Bottom Case (HP Authorized Service Providers Only) Required Equipment Small Phillips screwdriver. Small flat-blade screwdriver. Removal Procedure Note: When Replacing the Motherboard If possible, record the computer’s Service ID before you replace the motherboard. (You will then store the Service ID in the EEPROM on the new motherboard PCA.) Do this using the Service...

  • Page 43: Figure 2-16. Removing The Motherboard

    Insert the tabs on the end of the panel into the slots in the bottom case. When installing the vent panel, insert the pin on the back end of the panel under the bracket on the bottom case. HP OmniBook 6000 Screws, M2x15mm (2) Figure 2-16. Removing the Motherboard Removal and Replacement Screws, M2.5x4mm (3)
  • Page 44 If you need to install or replace the docking or PCMCIA doors, see the figures below. Figure 2-17. Installing Docking Doors Figure 2-18. Installing the Lower PCMCIA Door 2-24 Removal and Replacement HP OmniBook 6000...

  • Page 45: Replacing The Motherboard

    EEPROM on the new motherboard with the proper settings for the display—see page 2-26. If the EEPROM is not programmed correctly, the display will not turn on. HP OmniBook 6000 Screw, M2.5x4mm CPU module lock screw...
  • Page 46 Storing Unit Information Electronically When replacing a motherboard PCA, you will need to download the OmniBook 6000 service package from the Partnership Web site (see page vi). This package contains the following: Image for creating a bootable Display Update floppy disk.

  • Page 47: Replacing The Bottom Case

    4. While holding the paper label in place, attach a serial label overlay into the outer recess. It covers and protects the serial label. Figure 2-20. Example of Serial Number Label HP OmniBook 6000 HP Serial Number (S)TW711A1234 (1P) F2072 W EA MFG# TW711A1234...

  • Page 48: Repairing The Bios Ic (Hp Authorized Service Providers Only)

    A new BIOS IC contains only enough basic programming to boot the OmniBook. After installing a new power supply PCA, you must reprogram the BIOS IC, preferably with the latest BIOS. You can download the latest BIOS from the HP Notebook Web site (see page vi)—follow the directions provided.

  • Page 49: Removing Other Components (Hp Authorized Service Providers Only)

    Removing Other Components (HP Authorized Service Providers Only) Required Equipment Small Phillips screwdriver. Small flat-blade screwdriver. Removal Procedure 1. Unplug the ac adapter, if present, and remove the battery. Remove the secondary battery if one is installed. 2. Remove the assemblies and follow the additional steps given in the table below.
  • Page 50 2-25), and carefully lift the board off of the connector underneath. Reassembly Notes: Make sure the DIP switches on the new display interface PCA match the settings shown on the label on the display cable, or you risk damaging the display. HP OmniBook 6000...
  • Page 51 OmniBook. After installing the new PCA, you must reprogram the BIOS IC, preferably with the latest BIOS. You can download the latest BIOS from the HP Notebook Web site (see page vi)—follow the directions provided. Remove the screw from the board (see the figure on page2-25), and carefully lift the board off of the connector underneath.

  • Page 53: Troubleshooting And Diagnostics

    Diagnostic tools  OmniBook DiagTools diagnostic program (page 3-14).  Power-on self-test (page 3-21).  Sycard PCCtest 450 PC Card (page 3-24).  Desktop Management Interface (page 3-25).  BIOS Setup utility (page 3-27). HP OmniBook 6000 Troubleshooting and Diagnostics...

  • Page 54: Troubleshooting

    Troubleshooting The suggestions in this section can help isolate and repair the cause of a problem. To ensure quality repair, HP recommends that you follow the basic troubleshooting steps shown in the illustration below. Troubleshooting and Diagnostics Check the customer’s description of the problem and any supporting information.

  • Page 55: Troubleshooting The Problem

    Run tests that check the repaired function, such as in the DiagTools diagnostic Function Tests. program (page 3-14). –and– Failed Tests. Run any other tests that failed during troubleshooting. HP OmniBook 6000 Run the basic test of the DiagTools diagnostic program Troubleshooting and Diagnostics...

  • Page 56: Suggestions For Troubleshooting

    Describes Describes Tests Describes Tests Describes Tests Describes Describes Describes Describes Describes Describes Describes Tests Describes Status Status Tests (with Describes boot CD) Describes BIOS Setup Configures Describes Configures Describes Configures Configures Configures Configures Configures Configures Configures HP OmniBook 6000...

  • Page 57: Table 3-2. Troubleshooting Suggestions

    Use BIOS Setup to check the boot order and to make sure that floppy boot is enabled. Try using alternate connection (with or without floppy cable). HP OmniBook 6000 Repair Center: Repair Center: Likely Causes Comments ac adapter. Check ac adapter. Remove any SDRAM modules and SDRAM module.
  • Page 58 The user must call Technical Support and provide proof of ownership. Password removal is restricted to certain sites. See page 5-1. Battery. Battery capacity often decreases after a year or Motherboard. more. Battery or contacts. Motherboard. HP OmniBook 6000...
  • Page 59 Try external monitor. White display. Adjust display brightness. Erratic display. Bright or missing See quality statement on pixels or lines. page 5-2. HP OmniBook 6000 Repair Center: Repair Center: Likely Causes Comments Battery or contacts. Check battery and ac adapter.
  • Page 60 Floppy drive module or contacts. External floppy drive cable. Motherboard. External floppy drive cable. Floppy drive module. Keyboard. Try reinserting the flex cable in the connector on the Power supply PCA. power supply PCA. Motherboard. HP OmniBook 6000...
  • Page 61 Check for sound resource conflicts in Device Manager. Sound does not Check settings in BIOS record. Setup. Check software controls. Test audio with DiagTools diagnostics. HP OmniBook 6000 Repair Center: Repair Center: Likely Causes Comments Y-adapter. PS/2 device. Motherboard. Keyboard.
  • Page 62 Run the DiagTools LAN test. 3-10 Troubleshooting and Diagnostics Repair Center: Repair Center: Likely Causes Comments Motherboard. Use loop-back connector when testing serial or parallel port—see page 3-16. Mini-PCI card. Mini-PCI panel. Motherboard. Mini-PCI card. Mini-PCI panel. Motherboard. HP OmniBook 6000...
  • Page 63 Check for conflicts or refresh the device list in Device Manager. Zoomed Video is supported only in the lower slot. Check the HP Notebook Web site for installation instructions (page vi). When using a PC card in a docking system, insert or remove the card while the system is turned on.
  • Page 64 Run the BIOS Setup utility and turn off Intel SpeedStep Mode. 3-12 Troubleshooting and Diagnostics Repair Center: Repair Center: Likely Causes Comments CPU module. If computer slows after a period of continuous activity, Motherboard. check heatsink—see the previous symptom. HP OmniBook 6000...
  • Page 65 Setup. Try using the corresponding port on the computer while undocked. General plug-in Check module contacts. module problems Push system-off button. HP OmniBook 6000 Repair Center: Repair Center: Likely Causes Comments Docking product. Test the corresponding OmniBook ports while Motherboard.

  • Page 66: Diagnostic Tools

    The tests are non-destructive, and are intended to preserve the state of the computer. The OmniBook reboots when you exit the program so drivers can be loaded. Updating DiagTools You can download the latest version of DiagTools from the HP Notebook Web site (see page vi), then follow the included instructions. 3-14...
  • Page 67 Running DiagTools 1. Restart the OmniBook. 2. When the HP logo appears, press F10 to start the diagnostic test. 3. Go through the first several screens. 4. When the hardware detection finishes, check the list of detected hardware. The following...

  • Page 68: Figure 3-3. Serial And Parallel Loopback Connectors

    See the wiring diagrams below. Figure 3-3. Serial and Parallel Loopback Connectors 3-16 Troubleshooting and Diagnostics The log file contains a hardware summary and a list of all test results HP OmniBook 6000...

  • Page 69: Table 3-3. Omnibook Diagnostic Error Codes

    Check the CPU module for shorts. Replace the CPU module. Replace the motherboard. 0170h – Replace the motherboard. 0172h HP OmniBook 6000 Code Suggestions 0180h Replace the SDRAM module (each 01000000h represents 16 MB). Replace the motherboard.
  • Page 70 2140h – Replace the display adapter PCA. Replace the 2141h motherboard. Replace the display assembly. 2150h Replace the display assembly. Replace the display adapter PCA. Replace the motherboard. If error also occurs with external monitor, replace the motherboard. HP OmniBook 6000...
  • Page 71 Insert a different PC Card and repeat the test. 1206h Replace the PCMCIA socket. Replace the motherboard. 1207h Reset the computer. Replace the motherboard. HP OmniBook 6000 Code Suggestions USB Tests 1301h Reprogram the BIOS IC. Replace the power supply PCA. Replace the motherboard.
  • Page 72 9606h Run the full HDD test. Reformat the hard disk. If necessary, recreate the Hibernate partition, then run FDISK to partition the hard disk. 9607h Back up data, then reformat the hard disk. Replace the hard disk. HP OmniBook 6000...

  • Page 73: Power-On Self-Test

    PCA) or external ROM checksum failure. 1 long-5 short Display DIP switches and EEPROM settings do not match (check DIP switch settings, reprogram EEPROM). * Up to four groups of short beeps, except as noted. HP OmniBook 6000 Troubleshooting and Diagnostics 3-21...

  • Page 74: Table 3-5. Post Messages

    RAM cache failed and BIOS disabled the cache. May require replacement of motherboard. A disabled cache slows system performance considerably. 02F0: CPU ID: CPU socket number for Multi-Processor error. 02F4: EISA CMOS not writeable ServerBIOS2 test error: Cannot write to EISA CMOS. 3-22 Troubleshooting and Diagnostics Table 3-5. POST Messages HP OmniBook 6000...
  • Page 75 Displays the address nnnn of the upper limit of Upper Memory Blocks, indicating released segments of the BIOS which can be reclaimed by a virtual memory manager. Video BIOS shadowed Video BIOS copied to shadow RAM. HP OmniBook 6000 Troubleshooting and Diagnostics 3-23...

  • Page 76: Sycard Pcctest 450 Cardbus Card (Optional)

    OmniBook 6000 (PCI1420) Lower PCT450 -0 -v -b75 3-24 Troubleshooting and Diagnostics PCMCIA PC Card (16-bit) test (PC Card configuration header) CardBus (32-bit) test (CardBus configuration header) TESTCB -1 -v -b75 -jsD000:0 TESTCB -0 -v -b75 -jsD000:0 HP OmniBook 6000...

  • Page 77: Desktop Management Interface (Dmi)

    2. Start Windows, if it is not already running. 3. Insert the Recovery CD into the CD-ROM drive, or insert disk #1 into the floppy drive. 4. Select and run the SETUP program from the dmi\disk1 directory on the CD (under \hp\Drivers), or from floppy disk #1.
  • Page 78 OmniBook computers. Windows-compatible DMTF Service Layer software, which controls access to the DMI. A client agent. The HP Remote DMI Agent is a DMI application and also a network server-side stream-based application. The Remote Agent is listening for Remote Application connection requests.

  • Page 79: Bios Setup Utility

    1. Close all applications, then click Start, Shut Down, Reboot. (If necessary, you can press CTRL+ALT+DEL to reboot.) 2. When the HP logo appears, press F2 to enter the BIOS Setup utility. 3. The pointing devices are not active in BIOS Setup, so you will need to use the keyboard to navigate: Press the LEFT and RIGHT arrow keys to move among menus.
  • Page 80 * Resume, Undock, and Internal hard disk drive lock options are available only if the Boot option is enabled. 3-28 Troubleshooting and Diagnostics Default Auto Enabled Both Enabled Enabled 3F8h, IRQ4 Disabled 2F8h, IRQ3 DMA0 Enabled 378h IRQ7 DMA3 Default Clear Clear Enter Enter Enabled Enabled Disabled Disabled Enabled HP OmniBook 6000...
  • Page 81 Discards any Setup changes made since last save, and remains in Setup. Does not affect password, date, or time changes. Save Changes Saves Setup changes, and remains in Setup. Security settings are saved when changed. HP OmniBook 6000 Default Automatic Max. Power Savings 2 minutes...

  • Page 83: Replaceable Parts

    Replaceable Parts This chapter contains an exploded view of the OmniBook and the following lists of parts: OmniBook replaceable parts (page 4-3). Accessory replacement parts (page 4-5). Part number reference (page 4-6). HP OmniBook 6000 Replaceable Parts...

  • Page 84: Figure 4-1. Exploded View

    Figure 4-1. Exploded View Replaceable Parts HP OmniBook 6000...

  • Page 85: Table 4-1. Omnibook Replaceable Parts

    Keyboard, Turkish Keyboard, UK English Keyboard, US English Kit, OB6000 feet/bumpers Bumpers, display (16 in kit) Covers, display screw (16 in kit) Feet, rubber (16 in kit) HP OmniBook 6000 Part Number Exchange Part Number F2072-60906 Maxell ML1220 or equivalent...
  • Page 86 (see above kit) (see above kit) (see above kit) F2072-60927 (see above kit) (see above kit) (see above kit) (see above kit) F2072-60925 (see above kit) (see above kit) (see above kit) F2072-60919 F2072-60921 F2072-60909 HP OmniBook 6000 User- Repl.

  • Page 87: Table 4-2. Accessory Replaceable Parts

    SDRAM module, 32 MB, SODIMM (100 MHz) SDRAM module, 64 MB, SODIMM (100 MHz) SDRAM module, 128 MB, SODIMM (100 MHz) SDRAM module, 256 MB, SODIMM (100 MHz) Tray, docking E HP OmniBook 6000 Part Number Exchange Part Number 0950-3634...

  • Page 88: Table 4-3. Part Number Reference

    Adapter, docking module bay Charger, battery (external) Tray, docking E Drive, floppy disk module Battery, secondary module Drive, DVD module Drive, CD-ROM module Drive, LS-120 module Drive, CD-RW module Card, mini-PCI (LAN/modem, 3Com) Card, mini-PCI (SW modem, Ambit) User Repl. HP OmniBook 6000...
  • Page 89 F2072-60943 F2072-60944 F2072-60945 F2072-60946 F2072-60947 F2072-60948 F2072-60949 F2072-60950 F2072-60951 HP OmniBook 6000 Description Case, top Battery, main (14.8 V) Panel, power button Heatsink (with fan) Tray, hard disk drive Drive housing, second hard disk drive PCA, power supply PCA, volume...
  • Page 90 Recovery CD, Norwegian W2K Recovery CD, Swedish W2K Recovery CD, Finnish W2K Recovery CD, Danish W2K Recovery CD, Italian W2K Label, MS Product ID (W95) Label, MS Product ID (W98) Label, MS Product ID (W2K) User Repl. HP OmniBook 6000...

  • Page 91: Reference Information

    The statement can be a fax copy of the document. The fact that the unit is in the hands of an HP representative on behalf of the customer is not evidence of ownership.

  • Page 92: Hewlett-Packard Display Quality Statement

    HP OmniBook TFT displays meet or exceed all HP standards for cosmetic quality of TFT displays. HP does not warrant that the displays will be free of cosmetic imperfections. TFT displays can have a small number of cosmetic imperfections and still conform to HP’s cosmetic quality specifications.

  • Page 93: Table 5-1. Omnibook 6000 Lcd Guidelines (14.1/15.0" Tft, Xga)

    Table 5-1. OmniBook 6000 LCD Guidelines (14.1/15.0” TFT, XGA) Type of Imperfection Imperfections Not Allowed Electrical Imperfections: Bright dots Dark dots Mechanical Imperfections: Discoloration Polarizer bubbles, dents Definitions of imperfections: Bright or dark dot: a subpixel (red, green, or blue dot) that is stuck on or off.

  • Page 94: Service Notes

    Service Notes Service notes containing important repair information for the HP OmniBook 6000 will be issued periodically as needed. These notes are available online at the Partnership Web site—see page vi. Reference Information HP OmniBook 6000...
  • Page 96 1. Product Information 2. Removal and Replacement 3. Troubleshooting and Diagnostics 4. Replaceable Parts 5. Reference Information Part Number Printed in U.S.A. 4/00 F2072-90045...

Table of Contents