Removal and Replacement Procedures
Hard drives (hard drive cover, shield, and connector included with
hard drive and in Miscellaneous Plastics Kits)
80-GB (5400-rpm)
80-GB (4200-rpm)
60-GB (5400-rpm)
60-GB (4200-rpm)
40-GB (4200-rpm)
30-GB (4200-rpm)
5. Remove the hard drive by following these steps:
a. Turn the notebook upside down, with the front
b. Remove the two PM2.5×9.5 screws 1 that secure the
c. Use the notch 2 on the hard drive cover to lift the rear
Removing the Hard Drive
d. Remove the hard drive.
5–6
Spare Part Number Information
facing you.
hard drive to the notebook.
edge of the hard drive up and swing it forward 3.
Maintenance and Service Guide
350082-001
336992-001
336991-001
336990-001
336989-001
350081-001