HP nx6130 Maintenance And Service Manual page 94

Removal and Replacement Procedures
8. Remove the two PM2.5×4.0 hard drive frame shoulder
screws 1 from each side of the hard drive.
9. Remove the two PM2.5×4.0 hard drive frame screws 2 from
each side of the hard drive.
10. Remove the two PM1.5×3.5 hard drive frame screws 3 from
the front of the hard drive.
11. Lift the frame straight up 4 to remove if from the hard drive.
12. Remove the hard drive connector 5 from the hard drive.
Removing the Hard Drive Frame and Connector
Reverse the above procedure to install and reassemble the
hard drive.
6–8 Maintenance and Service Guide