Power Connector Cable - HP Compaq Mini CQ10 Maintenance And Service Manual

Power connector cable

Description
Power connector cable
Power connector bracket
Before removing the power connector cable, follow these steps:
1. Shut down the computer. If you are unsure whether the computer is off or in Hibernation, turn the
computer on, and then shut it down through the operating system.
2. Disconnect all external devices connected to the computer.
3. Disconnect the power from the computer by first unplugging the power cord from the AC outlet
and then unplugging the AC adapter from the computer.
4. Remove the following components:
a. Battery (see
b. Service access cover (see
c. Hard drive (see
d. Keyboard (see
e. Top cover (see
f. Display assembly (see
g. System board (see
Remove the power connector cable:
Battery on page 40).
Service access cover on page
Hard drive on page
Keyboard on page 55).
Top cover on page 58).
Display assembly on page
System board on page
43).
45).
61).
71).
Component replacement procedures
Spare part number
622329-001
634873-001
75