HP Compaq Mini 700 Maintenance And Service Manual page 76

c. Remove the display panel (3) from the display enclosure. An 8.9-inch display panel for the
HP Mini 1000 and the Compaq Mini 700 is available as spare part number 509698-001. A
10.1-inch display panel for the Compaq Mini 700 only is available as spare part number
509703-001.
8. If it is necessary to replace the display panel brackets, perform the following steps:
a. Remove the four Phillips PM2.0×3.0 screws (1) that secure the brackets to the display panel.
b. Remove the brackets (2). The brackets are available in the Display Hinge Kit, spare part
number 504596-001 for all 8.9-inch panels or 515207-001 for 10.1-inch panels
(Compaq Mini 700 only).
68 Chapter 4 Removal and replacement procedures