HP Compaq Presario M2000 Maintenance And Service Manual page 111

Removal and Replacement Procedures
✎
Before disconnecting the cables, make note of which wireless
antenna cable is attached to which antenna clip on the Mini
PCI communications card.
5. Disconnect the wireless antenna cables 1 from the Mini PCI
communications card.
6. Spread the two retaining tabs 2 that secure the Mini PCI
communications card to the communications compartment
socket. (The front edge of the board rises up).
7. Remove the wireless communications card by pulling the
board away from the socket at a 45-degree angle 3.
✎
Mini PCI communications cards are slotted 4 to prevent
incorrect installation into the Mini PCI socket.
Removing a Mini PCI Communications Card
Reverse the above procedure to install a Mini PCI
communications card.
5–18 Maintenance and Service Guide