Power/Battery Pass-Through Board - HP Compaq Mini 110 Maintenance And Service Manual

Power/battery pass-through board

Description
Power/battery pass-through board
For use on the following model numbers only: HP: 110-1000 — 110-1099 and Compaq: 110c-1000
— 110-1099
For use on the following model numbers only: HP: 110-1100 — 110-1199 and Compaq: 110c-1100
— 110-1199
Before removing the power/battery pass-through board, follow these steps:
1. Shut down the device. If you are unsure whether the device is off or in Hibernation, turn the device
on, and then shut it down through the operating system.
2. Disconnect all external devices connected to the device.
3. Disconnect the power from the device by first unplugging the power cord from the AC outlet and
then unplugging the AC adapter from the device.
4. Remove the battery (see
5. If your device has WWAN capability, remove the SIM (see
6. Remove the following components:
a.
b.
c.
Remove the power/battery pass-through board:
1. Disconnect the power cable (1).
2. Remove the 2 Phillips BP2.5×5.0 screws (2) that secure the power/battery pass-through board to
the base enclosure.
66 Chapter 4 Removal and replacement procedures
Battery on page
Keyboard (see Keyboard on page
Hard drive or solid-state drive (see
Top cover (see Top cover on page
44).
SIM on page
48)
Mass storage devices on page
57)
Spare part number
537615-001
581326-001
45).
54)