Windows 7 Backup And Recovery; Backing Up And Recovering Using Roxio Backontrack; Creating A Copy Of The Hard Drive - HP Compaq Mini 110 Maintenance And Service Manual

Windows 7 backup and recovery

Use the instructions in the section if Windows 7 is installed on your computer.
To protect your information, back up your files and folders. In case of system failure, you can use the
backup files to restore your computer.
CAUTION:
Recovery utility. Therefore, HP recommends that you download the Disaster Recovery utility SoftPaq,
and then extract it to a USB flash drive as soon as possible after software setup. For details, refer to
"Downloading and extracting the Disaster Recovery utility" later in this chapter.
Depending on your computer model, you may have one of the following backup and recovery solutions:
●
Roxio BackOnTrack
●
HP Recovery Manager
NOTE: For detailed information, perform a search for these topics in Help and Support.

Backing up and recovering using Roxio BackOnTrack

Successful recovery after a system failure depends on whether you have completely backed up your
files. If Roxio BackOnTrack is preinstalled on your computer, BackOnTrack allows you to create a
backup of your computer image. You should create the initial backup immediately after software setup.
As you add new software and data files, you should continue to back up your system on a regular basis
to maintain a reasonably current backup.
Note the following guidelines when backing up your information:
● Store personal files in the Documents library and back up this folder regularly.
●
Back up templates stored in their associated programs.
●
Save customized settings in a window, toolbar, or menu bar by taking a screen shot of your settings.
The screen shot can be a time-saver if you have to reset your preferences.
To copy the screen and paste it into a word-processing document, follow these steps:
1. Display the screen.
2. Copy the screen:
●
●
3. Open a word-processing document, select Edit>Paste.
4. Save the document.

Creating a copy of the hard drive

The back up drive function of BackOnTrack creates a Disaster Recovery Set that is an exact image of
your hard drive data. You can back up the image to an external hard drive (purchased separately).
To create a Disaster Recovery Set using BackOnTrack, follow these steps:
114 Chapter 8 Backup and recovery
In the event of a hard drive failure, you cannot use your computer to access the Disaster
To copy the active window, press
To copy the entire screen, press
alt+fn+prt sc.
fn+prt sc.