Advertisement
PRESSURE
PRESSURE
PRESSURE
PRESSURE
PRESSURE
ASSEMBLY AND OPERATING INSTRUCTIONS
Visit our Web site at http://www.harborfreight.com
Copyright © 2001 by Harbor Freight Tools. All rights reserved. No portion of this
manual or any artwork contained herein may be reproduced in any shape or form
without the express written consent of Harbor Freight Tools.
For technical questions and replacement parts, please call 1-800-444-3353
2 HP
2 HP
, ELECTRIC
, ELECTRIC
2 HP , ELECTRIC
, ELECTRIC
2 HP
2 HP
, ELECTRIC
3491 Mission Oaks Blvd., Camarillo, CA 93011
W
W
A S H E R
A S H E R
W A S H E R
A S H E R
W
W
A S H E R
4 5 8 0 2
Revised Parts List and Diagram REV 09/02
®
Advertisement
Table of Contents
Related Manuals for Chicago Electric 45802
Summary of Contents for Chicago Electric 45802
- Page 1 PRESSURE PRESSURE A S H E R A S H E R PRESSURE W A S H E R A S H E R PRESSURE PRESSURE A S H E R 2 HP 2 HP , ELECTRIC , ELECTRIC 2 HP , ELECTRIC , ELECTRIC 2 HP 2 HP...
-
Page 2: Specifications
If there is any doubt, do not operate the product. Observe work area conditions. Keep work area clear of all persons. Do not overreach. Keep proper footing and balance at all times. Do not reach over or across running machines. SKU 45802 Page 2... - Page 3 (GFCI) built into the plug of the power-supply cord. This device provides additional protections from the risk of electric shock. Should replacement of the plug or cord become necessary, use only identical replacement parts that include GFCI protection. SKU 45802 Page 3...
- Page 4 Do not allow children to operate the pressure washer at any time. Before starting the Pressure Washer in cold weather, check all parts of the equipment and be sure ice has not formed anywhere on the equipment. SKU 45802 Page 4...
- Page 5 If any parts are missing or broken, please call Harbor Freight Tools at the number on the cover of this manual. In case of problems with this unit, do not use it until you have consulted an authorized service center. SKU 45802 Page 5...
- Page 6 In this case, the fitting has to be carried out as shown in the Diagram on Page 13. All possible harmful parts of the package (plastic bag, staples, etc.) should be kept out of children’s reach. SKU 45802 Page 6...
- Page 7 (min. 15bar/200psi) with an inside diameter of at least 13 mm (1/2”). Attach the Lance to the Spray Gun. Connect the High-Pressure Hose [B.5] to the Delivery Pipe Outlet [B.6]. Use only cold water. Open the Water Valve [B.3] completely. SKU 45802 Page 7...
- Page 8 13. Using Foaming Lance: Attach Foaming Lance to the Gun as shown in Diagram C below. Turn on the Washer. Suction and mixing will occur automatically as the water flows through the Lance and the Detergent Container. Diagram C SKU 45802 Page 8...
-
Page 9: Moving And Storage
AND NOT BY THE BUYER. THE BUYER ASSUMES ALL RISK AND LIABILITY ARISING OUT OF HIS OR HER REPAIRS TO THE ORIGINAL PRODUCT OR REPLACEMENT PARTS THERETO, OR ARISING OUT OF HIS OR HER INSTALLATION OF REPLACEMENT PARTS THERETO. REV 04/04 REV 09/03 SKU 45802 Page 9... -
Page 10: Assembly Drawings And Parts Lists
Assembly Drawings and Parts Lists Fig. 1a: Assembly Drawing for Pressure Washer, Part 1 NOTE: Some parts are listed and shown for illustration purposes only and are not available individually as replacement parts. REV 04/04 REV 09/02 SKU 45802 Page 10... - Page 11 Assembly Drawings and Parts Lists Fig. 1b: Parts List for Pressure Washer REV 09/02 SKU 45802 Page 11...
- Page 12 Assembly Drawings and Parts Lists Fig. 1b: Parts List for Pressure Washer (continued) REV 09/02 SKU 45802 Page 12...
- Page 13 Assembly Drawings and Parts Lists Fig. 1b: Parts List for Pressure Washer (continued) NOTE: Some parts are listed and shown for illustration purposes only and are not available individually as replacement parts. REV 09/02 SKU 45802 Page 13...
- Page 14 Assembly Drawings and Parts Lists Fig 2a: Assembly Drawing for Gun Assembly SKU 45802 Page 14 REV 08/02 REV 09/02 REV 09/04...
- Page 15 Lance Kit 4 Conncecting Rod Assembly Connecting Rod O-Ring Connecting Rod Kit 5 Nozzle Head Assembly Nozzle Sleeve Small O-Ring Nozzle Sleeve Nozzle Sleeve Big O-Ring Lamella Nozzle Nozzle Cover Color Dot SKU 45802 Page 15 REV 09/02 REV 09/04...
-
Page 16: Troubleshooting
Water is in the oil. O-Rings (water and oil) are worn Check and/or replace. out. Water leakage from Seals are worn out. Replace the seals. the head. O-Ring Seal System is worn out. Replace the O-Rings. SKU 45802 Page 16 REV 09/02 REV 09/04...