Page 1
1200W Paint DRYinG LamP model 97641 assembLY anD OPeRatiOn instRuctiOns Diagrams within this manual may not be drawn proportionally. Due to continuing improvements, actual product may differ slightly from the product described herein. ® Distributed exclusively by Harbor Freight Tools 3491 Mission Oaks Blvd., Camarillo, CA 93011...
This Lamp generates high temperatures which may ignite the dust or fumes. use in a well-ventilated work area. keep bystanders and children away while operating Lamp. Distractions can cause you to lose control. For technical questions, please call 1-800-444-3353. SKU 97641 Page 2...
Do not use Lamp if the Power switch does not turn it on or off. Any tool that cannot be controlled with the Power Switch is dangerous and must be replaced. For technical questions, please call 1-800-444-3353. SKU 97641 Page 3...
Follow all precautions provided with paint used. Do not place closer than 12 inches from surface being dried. For technical questions, please call 1-800-444-3353. SKU 97641 Page 4...
Always replace a damaged extension cord or have it repaired by a qualified electrician before using it. Protect your extension cords from sharp objects, excessive heat, and damp or wet areas. For technical questions, please call 1-800-444-3353. SKU 97641 Page 5...
Page 6
When unpacking, check to make sure that the item is intact and undamaged. If any parts are missing or broken, please call Harbor Freight Tools at the number shown on the cover of this manual as soon as possible. For technical questions, please call 1-800-444-3353. SKU 97641 Page 6...
Lamp on a level surface during use to prevent rolling. Set the four legs upright and using the Leg Bolts (4), washers and nuts, fasten each leg to the Bottom Pole (1). (See Figure b, below.) Figure B For technical questions, please call 1-800-444-3353. SKU 97641 Page 7...
Page 8
Connector adjusted to the proper height, insert the plug at the end of the Power Cord (10) into the nearest outlet. (See Figure D, below.) Figure D For technical questions, please call 1-800-444-3353. SKU 97641 Page 8...
If abnormal noise or vibration occurs, have the problem corrected before further use. Do not use damaged equipment. For technical questions, please call 1-800-444-3353. SKU 97641 Page 9...
Buyer. THe Buyer AssuMes All risk AND liABiliTy ArisiNg OuT OF His Or Her repAirs TO THe OrigiNAl prODuCT Or replACeMeNT pArTs THereTO, Or ArisiNg OuT OF His Or Her iNsTAllATiON OF replACeMeNT pArTs THereTO. For technical questions, please call 1-800-444-3353. SKU 97641 Page 10...
If product has no serial number, record month and year of purchase instead. note: Some parts are listed and shown for illustration purposes only, and are not available individually as replacement parts. For technical questions, please call 1-800-444-3353. SKU 97641 Page 12...