Installing A Hard Drive - HP ENVY 14 User Manual

Installing a hard drive

1. Insert the hard drive (1) into the hard drive bay, and then slide the hard drive to the left until it
snaps into place.
2. Replace the hard drive screws (2).
3. Replace the battery.
NOTE:
4. Replace the battery cover (1).
5. Slide the battery cover (2) to the rear until it is seated.
NOTE:
6. Reconnect external power and external devices.
7. Turn on the computer.
34 Chapter 5 Maintenance
For instructions on replacing the battery, refer to
The battery cover release latch automatically locks into place.
Inserting the battery on page 28.
ENWW