Standard Memory; Memory Upgrades - HP EliteBook 2530p Specifications

QuickSpecs
Memory
800-MHz DDR2 SDRAM
Two DIMM slots supporting dual channel memory
DIMM sizes supported: 1024 MB, 2048 MB, and 4096 MB

Standard Memory

Optional Memory
Upgrades
Up to
1024 MB
2048 MB
3072 MB
4096 MB
8192 MB
NOTE: This chart does not represent all possible memory configurations. Due to the non-industry standard nature of some third-party
memory modules, we strongly recommend using only HP branded memory modules to ensure compatibility. If you mix memory
speeds, the system will perform at the lower memory speed. Availability of 4 GB or more of memory requires Windows Vista Business
64-bit or Linux. With Windows 32-bit operating systems, memory above 3 GB may not all be available due to system resource
requirements.

Memory Upgrades

1024 MB (1024 MB x 1)
2048 MB (2048 MB x 1)
4096 MB (4096 MB x 1 or 2048 MB x 2)
Support for up to 8192 MB of memory with the installation of optional DDR2 SDRAM memory kits. Both
memory slots are user accessible. Please refer to the Hardware and Software Guide for installation
procedures. Maximized dual-channel performance requires SODIMMs of the same size and speed in
both memory slots.
HP 1 GB (DDR2 800 MHz) SODIMM
HP 2 GB (DDR2 800 MHz) SODIMM
HP 4 GB (DDR2 800 MHz) SODIMM
DA - 13101 Worldwide QuickSpecs — Version 8 — 2.5.2009
HP EliteBook 2530p Notebook PC
Slot 1
1024 MB
1024 MB
2048 MB
2048 MB
4096 MB
Slot 2
Empty
1024 MB
1024 MB
2048 MB
4096 MB
KT292AA
KT293AA
KT294AA
Page 15