Preparing The Computer For Disassembly - HP Pavilion dv1000 Maintenance And Service Manual

Removal and Replacement Procedures
Disassembly Sequence Chart (Continued)
Section Description
5.11 Display Assembly
5.12 Base Enclosure
5.13 USB/S-Video Controller Board
5.14 Speaker Assembly
5.15 RTC Battery
5.16 Menu Control Button Board
5.17 Heat Sink
5.18 Fan
5.19 Processor
5.20 System Board
5.21 LED Board
5.3 Preparing the Computer for
Disassembly
Before you begin any removal or installation procedures:
1. Shut down the computer. If you are unsure whether the
computer is off or in Hibernation, turn the computer on,
and then shut it down through the operating system.
2. Disconnect all external devices connected to the computer.
3. Disconnect the power cord.
5–4
# of Screws Removed
4
HP Pavilion dv1000 = 19
HP Compaq nx4800 and
Compaq Presario V2000 = 18
2
0
0
4
3
2
0
4
HP Pavilion dv1000 = 3
HP Compaq nx4800 and
Compaq Presario V2000 = 2
Maintenance and Service Guide