Removing A Smart Card; Using A Usb Device; Activating The Usb 3.0 Port Functionality - HP Computer User Manual

Removing a smart card

CAUTION:
procedure to safely remove the smart card.
1. Save your information and close all programs associated with the smart card.
2. Click the remove hardware icon on the Windows desktop in the notification area, at the far right
of the taskbar, and then follow the on-screen instructions.
3. Pull the smart card out of the slot.

Using a USB device

Universal Serial Bus (USB) is a hardware interface that can be used to connect an optional external
device, such as a USB keyboard, mouse, drive, printer, scanner, or hub.
Some USB devices may require additional support software, which is usually included with the
device. For more information about device-specific software, see the manufacturer's instructions.
These instructions may be provided with the software, on disc, or on the manufacturer's website.
The computer has 3 USB ports that support USB 1.0, 1.1, 2.0, or 3.0 devices. Your computer also
has a USB charging port that provides power to an external device. An optional docking device or
USB hub provides additional USB ports that can be used with the computer.
NOTE: These ports support USB 2.0 by default. For details about activating the USB 3.0 port
functionality, see the next section.

Activating the USB 3.0 port functionality

Follow these steps to turn on the USB 3.0 port functionality:
1. Start Computer Setup. See
2. Select the option for USB ports and follow the on-screen instructions.
3. After you have saved the Computer Setup changes, install the USB 3.0 drivers:
a. Go to http://www.hp.com.
b. Click Support & Drivers, and then click the Drivers & Downloads tab.
c. Enter the product name in the text box, and then click Search.
d. Select your computer model, and then select your operating system.
e. Select the link for the USB 3.0 drivers, and follow the on-screen instructions.
To reduce the risk of loss of data or an unresponsive system, use the following
Starting Computer Setup on page 61.
Using a USB device 41