Bluetooth Module - HP COMPAQ PRESARIO G42 Maintenance And Service Manual

Bluetooth module

Description
Bluetooth module
Bluetooth module cable
Before removing the Bluetooth module, follow these steps:
1. Shut down the computer. If you are unsure whether the computer is off or in Hibernation, turn the
computer on, and then shut it down through the operating system.
2. Disconnect all external devices connected to the computer.
3. Disconnect the power from the computer by first unplugging the power cord from the AC outlet
and then unplugging the AC adapter from the computer.
4. Remove the battery (see
5. Remove the following components:
a.
Hard drive (see
b. Optical drive (see
c. Keyboard (see
d. Top cover (see
Remove the Bluetooth module:
1. Position the computer upright with the front toward you.
2. Disconnect the Bluetooth module cable (1) from the system board.
3. Remove the Bluetooth module and cable from the clips in the base enclosure (2).
4. Remove the Bluetooth module (3) from the base enclosure.
Battery on page 45).
Hard drive on page 46)
Optical drive on page
Keyboard on page 56)
Top cover on page 58)
49)
Component replacement procedures
Spare part number
537921-001
602822-001
67