System Board - HP COMPAQ 6715S Maintenance And Service Manual

System board

Description
System board for use only with HP Compaq 6715b computer models with WWAN capability (includes
WWAN module socket)
System board for use only with HP Compaq 6715b computer models without WWAN capability (does
not include WWAN module socket)
System board for use only with HP Compaq 6715s computer models
Before removing the system board, follow these steps:
Shut down the computer. If you are unsure whether the computer is off or in Hibernation, turn the
1.
computer on, and then shut it down through the operating system.
Disconnect all external devices connected to the computer.
2.
Disconnect the power from the computer by first unplugging the power cord from the AC outlet and
3.
then unplugging the AC adapter from the computer.
Remove the battery (see
4.
Remove the following components:
5.
Hard drive (see
a.
Memory/WLAN module compartment cover (see
b.
Optical drive (see
c.
Keyboard (see
d.
Switch cover (see
e.
Fan (see
f.
Heat sink (see
g.
Display assembly (see
h.
Top cover (see
i.
Remove the system board:
Press the PC Card eject button (1) twice. The first press releases the PC Card eject button from the
1.
PC Card slot. The second press releases the PC Card slot bezel from the PC Card slot. (The PC Card
slot bezel is partially ejected from the PC Card slot.)
NOTE:
Remove the PC Card slot bezel (2).
2.
80 Chapter 4 Removal and replacement procedures
Battery on page
Hard drive on page
Optical drive on page
Keyboard on page
Switch cover on page
Fan on page 63)
Heat sink on page
Display assembly on page
Top cover on page
The PC Card slot bezel is included in the Plastics Kit, spare part number 443905-001.
41).
45)
Expansion memory module on page
54)
56)
62)
64)
68)
73)
Spare part number
443896-001
443898-001
443897-001
49)