HP COMPAQ 6715S Maintenance And Service Manual page 85

Display assembly (see
f.
Top cover (see
g.
Remove the Media Card Reader/USB connector board:
Disconnect the Media Card Reader/USB connector board cable (1) from the system board.
1.
Remove the three Phillips PM2.5×5.0 screws (2) that secure the Media Card Reader/USB connector
2.
board to the computer.
Lift the Media Card Reader/USB connector board (3) straight up and remove it.
3.
Reverse this procedure to install the Media Card Reader/USB connector board.
Display assembly on page
Top cover on page 73)
68)
Component replacement procedures 79