Heat Sink - HP COMPAQ 6715S Maintenance And Service Manual

by high external temperatures, system power consumption, power management/battery conservation
configurations, battery fast charging, and software applications. Exhaust air is displaced through the
ventilation grill located on the left side of the computer.

Heat sink

Description
Heat sink (includes thermal material)
Thermal Material Kit for use only in all countries and regions except Japan and Asia Pacific
Thermal Material Kit for use only in Japan and Asia Pacific countries and regions
Before removing the heat sink, follow these steps:
Shut down the computer. If you are unsure whether the computer is off or in Hibernation, turn the
1.
computer on, and then shut it down through the operating system.
Disconnect all external devices connected to the computer.
2.
Disconnect the power from the computer by first unplugging the power cord from the AC outlet and
3.
then unplugging the AC adapter from the computer.
Remove the battery (see
4.
Release the keyboard (see
5.
Remove the switch cover (see
6.
Remove the fan (see
7.
Remove the heat sink:
Remove the four Phillips PM2.0×6.0 screws (1) that secure the heat sink to the system board.
1.
Release the heat sink (2) by lifting the right side until it disengages from the processor.
2.
NOTE:
processor, it may be necessary to move the heat sink from side to side to detach the heat sink from
the processor.
64 Chapter 4 Removal and replacement procedures
Battery on page
Keyboard on page
Switch cover on page
Fan on page
Due to the adhesive quality of the thermal material located between the heat sink and
41).
56).
62).
63).
Spare part number
443912-001
413706-001
445853-001