Expansion Memory Module - HP COMPAQ 6715S Maintenance And Service Manual

Expansion memory module

Description
2048-MB, PC2-5300, 1-DIMM, memory module
1024-MB, PC2-5300, 1-DIMM, memory module
512-MB, PC2-5300, 1-DIMM, memory module
Before removing the expansion memory module, follow these steps:
Shut down the computer. If you are unsure whether the computer is off or in Hibernation, turn the
1.
computer on, and then shut it down through the operating system.
Disconnect all external devices connected to the computer.
2.
Disconnect the power from the computer by first unplugging the power cord from the AC outlet and
3.
then unplugging the AC adapter from the computer.
Remove the battery (see
4.
Remove the expansion memory module:
Loosen the Phillips PM2.0×5.0 screw (1) that secures the memory/WLAN module compartment
1.
cover to the computer.
Lift the rear edge of the cover (2), swing it toward you, and remove the cover.
2.
NOTE:
number 443905-001.
Spread the retaining tabs (1) on each side of the memory module socket to release the memory
3.
module. (The edge of the module opposite the socket rises away from the computer.)
Battery on page
The memory/WLAN module compartment cover is included in the Plastics Kit, spare part
41).
Component replacement procedures
Spare part number
417506-001
414046-001
414045-001
49