HP COMPAQ 6715S Maintenance And Service Manual page 50

Flex the inside edges of the left and right sides (1) and the bottom edge (2) of the display bezel until
5.
the bezel disengages from the display enclosure.
Release the bottom edge of the display bezel (3) from the display assembly.
6.
Release the inverter (1) from the display enclosure as far as the display panel cable and backlight
7.
cable allow.
Disconnect the display panel cable (2) and the backlight cable (3) from the display inverter.
8.
Remove the display inverter.
9.
Reverse this procedure to install the display inverter.
44 Chapter 4 Removal and replacement procedures