10.
Remove the six Torx T8M2.5×6.0 screws (1) that secure the display panel to the display
enclosure.
11.
Remove the display panel (2).
12.
Remove the four Phillips PM2.0×3.0 screws (1) that secure each display hinge to the display panel.
13.
Remove the display hinges (2).
NOTE:
Reverse this procedure to install the display assembly.
Top cover
Description
Top cover (includes TouchPad, TouchPad cable, and fingerprint reader)
The left and right display hinges are available using spare part number 447204-001.
Spare part number
443921-001
Component replacement procedures
79