Display Assembly - HP COMPAQ 6510B Maintenance And Service Manual

Display assembly

Description
14.1-inch, WXGA+ display assembly for use only with HP Compaq 6515b computer models with
WWAN capability
14.1-inch, WXGA+, BrightView display assembly for use only with HP Compaq 6515b computer
models without WWAN capability
14.1-inch, WXGA+ display assembly for use only with HP Compaq 6515b computer models without
WWAN capability
Before removing the display assembly, follow these steps:
1. Shut down the computer. If you are unsure whether the computer is off or in Hibernation, turn the
computer on, and then shut it down through the operating system.
2. Disconnect all external devices connected to the computer.
3. Disconnect the power from the computer by first unplugging the power cord from the AC outlet and
then unplugging the AC adapter from the computer.
4. Remove the battery (see
5. Remove the memory/WLAN module compartment cover (see
on page
6. Disconnect the wireless antenna cables from the WLAN module (see
7. Remove the following components:
a. Keyboard (see
b. Switch cover (see
Remove the display assembly:
1. Disconnect the display panel cable (1) from the system board.
2. Remove the wireless antenna cables (2) from the routing channels and clips built into the top cover.
Battery on page
54).
Keyboard on page
Switch cover on page
46).
62)
68)
Component replacement procedures
Spare part number
443895-001
443894-001
443893-001
Expansion memory module
WLAN module on page 56).
75