HP COMPAQ 6510B Maintenance And Service Manual page 82

6. Remove the switch cover (see
7. Remove the fan (see
8. Remove the heat sink (see
Remove the processor:
1. Use a flat-bladed screwdriver to turn the processor locking screw (1) one-half turn counterclockwise
until you hear a click.
2. Lift the processor (2) straight up and remove it.
NOTE:
the processor socket when you install the processor. The illustration below shows the processor
removal steps for the HP Compaq 6515b computer model.
NOTE:
computer model.
Reverse this procedure to install the processor.
74 Chapter 4 Removal and replacement procedures
Switch cover on page
Fan on page
Heat sink on page
The gold triangle (3) on the processor must be aligned with the triangle (4) embossed on
The illustration below shows the processor removal steps for the HP Compaq 6510b
68).
69).
71).