Heat Sink - HP COMPAQ 6510B Maintenance And Service Manual

Heat sink

NOTE: All heat sink spare part kits include thermal material.
Description
For use with HP Compaq 6515b computer models
For use with HP Compaq 6510b computer models
Thermal Material Kit for use in all countries and regions except Japan and Asia/Pacific
Thermal Material Kit for use in Japan and Asia/Pacific countries and regions
Before removing the heat sink, follow these steps:
1. Shut down the computer. If you are unsure whether the computer is off or in Hibernation, turn the
computer on, and then shut it down through the operating system.
2. Disconnect all external devices connected to the computer.
3. Disconnect the power from the computer by first unplugging the power cord from the AC outlet and
then unplugging the AC adapter from the computer.
4. Remove the battery (see
5. Remove the keyboard (see
6. Remove the switch cover (see
7. Remove the fan (see
Remove the heat sink:
1. Remove the four Phillips PM2.0×6.0 screws (1) that secure the heat sink to the system board.
2. Release the heat sink (2) by lifting the right side until it disengages from the processor.
NOTE:
processor, it may be necessary to move the heat sink from side to side to detach the heat sink from
the processor.
Battery on page
Keyboard on page
Switch cover on page
Fan on page
Due to the adhesive quality of the thermal material located between the heat sink and
46).
62).
68).
69).
Component replacement procedures
Spare part number
443912-001
446920-001
413706-001
445853-001
71