Standard Memory; Memory Upgrades - HP Compaq 6910p Specifications

QuickSpecs
Memory
667-MHz DDR2 SDRAM
Two DIMM slots supporting dual channel memory
DIMM sizes supported: 512 MB, 1024 MB, and 2048 MB

Standard Memory

Standard Memory
Standard Memory Standard Memory
Optional Memory Optional Memory Optional Memory Optional Memory
Upgrades Upgrades Upgrades Upgrades
Up to Up to Up to Up to
1024 MB
1024 MB
1536 MB
2048 MB
4096 MB

Memory Upgrades

Memory Upgrades Memory Upgrades Memory Upgrades
512 MB (512 MB x 1)
1024 MB (1024 MB x 1 or 512 MB x 2)
2048 MB (2048 MB x 1 or 1024 MB x 2)
4096 MB (2048 MB x 2)
Support for up to 4096 MB of memory with the installation of optional DDR2 SDRAM memory kits. Both
memory slots are user accessible. Please refer to the Hardware and Software Guide for installation
procedures. Maximized dual-channel performance requires SODIMMs of the same size and speed in
both memory slots.
NOTE: This chart does not represent all possible memory configurations. Due to the non-industry NOTE: NOTE: NOTE:
standard nature of some third-party memory modules, we strongly recommend using only HP branded
memory modules to ensure compatibility. If you mix memory speeds, the system will perform at the lower
memory speed. Availability of 4 GB of memory requires Windows Vista Business 64-bit or Linux. With
Windows 32-bit operating systems, memory above 3 GB may not all be available due to system
resource requirements.
HP 512-MB (DDR2 667 MHz) SODIMM
HP 1024-MB (DDR2 667 MHz) SODIMM
HP 2048-MB (DDR2 667 MHz) SODIMM
DA - 12699 Worldwide — Version 13 — November 14, 2007
Slot 1 Slot 1 Slot 1 Slot 1
1024 MB
512 MB
1024 MB
1024 MB
2048 MB
HP Compaq 6910p Notebook PC HP Compaq 6910p Notebook PC HP Compaq 6910p Notebook PC HP Compaq 6910p Notebook PC
Slot 2 Slot 2 Slot 2 Slot 2
Empty
512 MB
512 MB
1024 MB
2048 MB
EM993AA
EM994AA
EM995AA
Page 16