HP 900 Reference Manual page 89

Security Menu
Setting
User Password Is
Administrator Password
Is
Set User Password
Set Administrator
Password
Smart Card Security
Boot
Resume*
Undock*
Internal Hard Disk Drive
Lock*
Removable Device Boot
* Resume, Undock, and Internal Hard Disk Drive Lock options are available only if Boot option is enabled.
Description
Shows if a user password is set.
Shows if an administrator password is set.
Press ENTER to set, change, or clear user password.
Password length can be no longer than 8 characters, 0-9, A-
Z, and cannot include special or accented characters.
Press ENTER to set, change, or clear administrator
password. This password protects BIOS Setup settings.
Password length can be no longer than 8 characters, 0-9, A-
Z, and cannot include special or accented characters.
Available only if a smart card accessory is installed. Sets
whether the password is read from a smart card instead of
entered from the keyboard.
Sets whether a user password is required when the
computer boots.
Sets whether a user password is required when resuming
from a suspended state. This setting is ignored when
Windows 2000 is running.
Sets whether a user password is required when undocking
the OmniBook. This setting is ignored when Windows 2000
is running.
Encodes the current user password (or administrator
password if that is the only password set) on the hard disk
drive.
Sets whether the floppy drive or other removable device is a
boot device.
Configuring the OmniBook
Using BIOS Setup
Default
Clear
Clear
Disabled
Enabled
Enabled
Disabled
Disabled
Enabled
Reference Guide 89