To Suspend The Omnibook When Closing The Display - HP 900 Reference Manual

Windows 2000
Operating the OmniBook
Using the OmniBook Display

To suspend the OmniBook when closing the display

Under Windows 2000, to set the action for closing the display, open Control Panel, open
Power Options, and on the Advanced tab, select an option for closing the lid. None
means that the display will turn off when you close the lid.
By default, the OmniBook display turns off when you close the display lid. You can
change this setting to suspend the OmniBook when you close the display lid.
1. Close all applications, then shut down Windows and restart the OmniBook.
2. When you see the HP logo, press F2 to enter the BIOS Setup utility.
3. From the Power menu, choose Lid Switch Mode.
4. Choose one of the following options:
Turn off LCD. Closing the lid turns off the display (default). Open the lid to turn on
the display again.
Suspend. Closing the lid suspends the OmniBook. Press the blue power button to
resume again.
5. Press F10 to save and exit the BIOS Setup utility.
30 Reference Guide