Connecting The Modem With An Adapter - HP COMPAQ 377703-001 Getting Started

Hardware Setup

Connecting the Modem with an Adapter

To connect the modem to an analog telephone line that does
not have an RJ-11 (modem) jack:
1. If the modem cable contains noise suppression circuitry 1,
plug the circuitry end of the modem cable 2 into the RJ-11
(modem) jack on the notebook.
Å
2. Plug the modem cable into the country-specific modem
adapter 3.
3. Plug the country-specific modem adapter 4 into the
telephone wall jack.
✎
1–8
To reduce the risk of electric shock, fire, or damage to
the equipment, do not plug the modem cable into a RJ-45
(network) jack.
Telephone wall jacks and modem cables vary in appearance by
region and country.
Getting Started