Remove the keyboard:
Remove the two Torx T8M2.5×9.0 screws that secure the keyboard to the computer.
1.
Turn the computer display-side up, with the front toward you.
2.
Open the computer as far as possible.
3.
Slide the four keyboard retention tabs (1) toward you. The tabs are located between the
4.
f1
keys, between the
keys.
Lift the rear edge of the keyboard (2) until it rests at an angle.
5.
Slide the keyboard back (3) until it rests against the display.
6.
36
Chapter 4 Removal and replacement procedures
f4
and
f5
keys, between the
f8
and
f9
keys, and between the
esc
and
f12
and
delete