HP 345561-001 Startup And Reference Manual page 99

Connecting a Modem with an Adapter
To connect a modem to an analog telephone line that does not
have an RJ-11 telephone jack:
1. Identify the RJ-11 jack 1 on the notebook.
2. If the modem cable has noise suppression circuitry 2, which
prevents interference with TV and radio reception, orient the
circuitry end of the cable toward the notebook.
3. Plug the modem cable into the RJ-11 telephone jack (not the
RJ-45 network jack) on the notebook 3.
4. Plug the modem cable into the country-specific modem
adapter 4.
5. Plug the country-specific modem adapter into the
telephone jack 5.
Connecting a modem with a modem adapter (Telephone wall jacks
vary in appearance by region and country.)
Å
WARNING: To reduce the risk of electric shock, disconnect the modem
from the telephone network before accessing an internal compartment
of the notebook. Internal compartments include the memory
compartment and the battery and hard drive bays.
Startup and Reference Guide—Part 2
Communications
7–5