HP 355385-001 Software Manual page 30

Security
8. When you are prompted to continue, press
9. To save your preferences and exit the Setup utility:
a. Press
b. Select Exit Saving Changes.
c. Then follow the instructions on the screen.
Your preferences are set as you exit Setup and are in effect when
the notebook restarts.
Deleting an Administrator Password
To delete an Administrator password:
1. Open the Setup utility by turning on (not restarting) the
notebook.
2. Press
displayed in the lower left of the screen.
For navigation instructions, press
3. Select Security from the menu bar. (To select a menu, use the
arrow keys.)
4. Select the Administrator password, and then press
5. Type the current password in the Enter Current Password
field, and then press
6. When you are prompted to continue, press
7. To save your preferences and exit the Setup utility.
a. Press
b. Select Exit Saving Changes.
c. Then follow the instructions on the screen.
Your preferences are set as you exit Setup and are in effect when
the notebook restarts.
2–10
(or select Exit from the menu bar).
esc
while the "Press <F10> to enter setup" prompt is
F10
(or select Exit from the menu bar).
esc
F1.
enter.
enter.
enter.
enter.
Software Guide