Table of Contents
Advertisement
Deleting a Power-On Password
To delete a power-on password:
1. Open the Setup utility by pressing
<F10> to enter setup" prompt is displayed in the lower left
corner of the screen.
2. Select Security from the menu bar. (To select a menu, use
the arrow keys.)
3. Select the Power-On Password field.
4. Type the current password in the Enter Current Password
field, and then press
5. When you are prompted to continue, press
6. To save your preferences and exit the Setup utility:
a. Press
b. Select Exit Saving Changes.
c. Then follow the instructions on the screen.
Entering Power-On Passwords
When you turn the notebook on, restart it, or resume from
Hibernation, you are prompted for a password. Type your
password using the same keys you used to set the password,
and then press
password, you must restart the notebook to try again.
Software Guide
enter
(or select Exit from the menu bar).
esc
After 3 unsuccessful attempts to enter the
enter.
while the "Press
F10
3 times.
Security
enter.
2–7
Advertisement
Table of Contents
