Table of Contents
Advertisement
About Power-On Passwords
A power-on password prevents unauthorized use of the notebook.
After being set, a power-on password must be entered each time
the notebook is turned on or restarted, or when the notebook
resumes from Hibernation. A power-on password:
Does not display as it is set, entered, changed, or deleted.
Must be set and entered with the same keys. For example,
a password set with keyboard number keys will not be
recognized if entered with embedded keypad number keys.
Can include up to 8 alphanumeric characters and is not
case sensitive.
Setting, Changing or Deleting Power-On
Passwords
A power-on password is set, changed, or deleted in the
Setup utility.
Setting a Power-On Password
To set a power-on password:
1. Open the Setup utility by pressing
<F10> to enter setup" prompt is displayed in the lower left
corner of the screen.
2. Select Security from the menu bar. (To select a menu, use
the arrow keys.)
3. Select the Power-On Password field.
4. Type the password in the Enter New Password field, and then
press
5. Type the password in the Confirm New Password field, and
then press
Software Guide
enter.
enter.
while the "Press
F10
Security
2–5
Advertisement
Table of Contents
