Setting Or Changing A Power Scheme; Using A Security Password - HP 355385-001 Software Manual

Power

Setting or Changing a Power Scheme

The Power Schemes tab in the Power Options window assigns
power levels to system components. You can assign different
schemes depending on whether the notebook is running on a
battery pack or AC power.
You can also set a Power Scheme that initiates Standby or turns
off the display or hard drive after a time interval (timeout) that
you specify.
To set or change a Power Scheme:
1. Access the Power Options window (see previous section).
2. Select the Power Schemes tab.
3. Select options from the drop-down list.
4. Select Save As and name the new Power Scheme.
5. Select OK.

Using a Security Password

You can add a security feature that prompts you for a password
when the notebook turns on or resumes from Standby or
Hibernation.
To set a password prompt:
1. Access the Power Options window.
2. Select the Advanced tab.
3. Select the Prompt for password when the computer resumes
from Standby check box.
4. Select OK.
For more information about using security passwords, see
Power-On Passwords"
1–12
in Chapter 2.
"About
Software Guide