HP 333953-001 Startup Manual page 25

Component
Quick Launch buttons (3)
(continued)
2
Power button
✎
This table describes default settings. For information about
changing the functions of the power button and using Standby
and Hibernation, refer on the Documentation Library CD to the
Software Guide, "Power" chapter.
Startup Guide
Description
✎
To use integrated WLAN or
Bluetooth, press the Wireless
On/Off button and ensure that
the Wireless On/Off light is on
before attempting to make a
connection. If the light does not
come on, verify that the device
utility has been installed and
enabled in the software.
HP-provided utilities must be
installed through Software
Setup. For more information,
refer in this guide to "Setting Up
Wireless LAN" and "Setting Up
Bluetooth" or to the Wireless
LAN Utility Installation
Instructions provided with your
notebook.
For more information, refer to "Using
Quick Launch Buttons," in Chapter 2
of the Hardware Guide on the
Documentation Library CD.
When the notebook is:
■
Off, press and release to turn on
the notebook.
■
In Standby, press and release to
exit Standby.
■
In Hibernation, press and release
to exit Hibernation.
If the system has stopped responding
and Windows shutdown procedures
cannot be used, press and hold for
5 seconds to turn off the notebook.
Notebook Features
(Continued)
3–3