Table of Contents
Advertisement
6. If you continue to receive the No Dial Tone error
Windows XP Home and XP Professional:
1. Select Start > Control Panel > Network and Internet
2. Select Phone and Modem Properties (menu in the left
3. Select your modem > Properties > Modem tab.
4. Clear the Wait for Dial Tone Before Dialing check box.
5. If you continue to receive the No Dial Tone error
Modem and Networking
message after clearing the check box:
a. Select Start > Settings > Control Panel > Phone and
Modems Options icon.
b. Select the Dialing Rules tab.
c. In the Locations list, select the location from which
you are dialing.
d. Select Edit.
e. Select your location from the drop-down list in the
Country/Region box.
f.
Select Apply > OK.
g. Select the Modem tab.
h. Select your modem.
i.
Select Properties > General tab.
j.
Clear the Wait for Dial Tone Before Dialing
check box.
Connections icon.
column) > Modem Tab.
message after clearing the check box:
a. Select Start > Control Panel > Network and Internet
Connections icon.
b. Select Phone and Modem Properties (menu in the
left column).
c. Select the Dialing Rules tab.
Using an Internal Modem
1–7
Advertisement
Table of Contents
