HP 2000/5700 User Manual page 55

Docking Messages
Passwords
Password options
Set Admin
password
Set User password
PC Identification
Internal Cache
External Cache
Disks menu
Floppy Disk Drive
Hard Disk Drive
system, which configures such cards.
"Auto-detect" performs a boot-device-only or
full configuration, depending on whether the
operating system last used was PnP or not.
Fast Boot. Skips the RAM test.
Enable SCSI BIOS. Enable only if drivers aren't
available for the operating system.
Enable boot sector virus check. Avoids a
potential boot sector message during reboot.
On or off. Provides prompts during docking and
undocking.
"Administrator Password" sets whether PC ID
and SCU-type changes are protected by the
administrator password.
"User Password" sets whether a user password
is required when the computer turns on, before
undocking, or when making SCU-type changes.
"Disable hard disk drive lock" sets whether a
user password with turn-on security can secure
data on the hard disk if the disk is moved to
another computer.
The administrator password provides protection
equal to the user password plus PC ID and SCU
protection. The administrator password can be
used whenever the user password is requested,
such as when changing the user password.
The user password protects user events
selected in Password Options, but doesn't give
access to protected administrator options, such
as PC ID.
Four text strings for name, company, address,
phone, etc.
Enables faster performance by using internal
processor memory.
Enables faster performance by using external
cache memory.
Specifies the type of floppy drive.
Specifies the type of hard disk for a
nonstandard hard disk.
Save required.
Immediate.
Immediate.
Immediate.
Immediate.
Reboot required.
Reboot required.
Reboot required.
Reboot required.
55