Speaker - HP EliteBook 6930p Maintenance And Service Manual

Speaker

Description
Speaker
Before removing the speaker, follow these steps:
1.
Shut down the computer. If you are unsure whether the computer is off or in Hibernation, turn the
computer on, and then shut it down through the operating system.
2.
Disconnect all external devices connected to the computer.
3.
Disconnect the power from the computer by first unplugging the power cord from the AC outlet
and then unplugging the AC Adapter from the computer.
4.
Remove the battery (see
5.
Remove the following:
a.
Hard drive (see
b.
Keyboard (see
c.
Switch cover (see
d. Display assembly (see
e. Top cover (see
f. Bluetooth module cable (see
Remove the speaker:
1. Disconnect the speaker cable (1) from the system board.
2. Remove the Torx8 T8M2.5×7.0 screw (2) that secures the speaker to the base enclosure.
96 Chapter 4 Removal and replacement procedures
Battery on page 50).
Hard drive on page 56)
Keyboard on page 65)
Switch cover on page
Display assembly on page
Top cover on page 90)
Bluetooth module cable on page
74)
85)
95)
Spare part number
486308-001