Never walk away and leave the tool running. Keep work area clean. Cluttered areas invite injuries. Keep children away. Children must never be allowed in the work area. Do not let them handle machines, tools, or extension cords. SKU 43533 Page 2...
Page 3
0 to 10 amps capability (up to 50 feet), with wire size rated at 18 AWG. Longer extension cords require larger size wire. If you are using the tool outdoors, use an extension cord rated for outdoor use. (signified by “WA” on the jacket). SKU 43533 Page 3...
Page 4
1) 3-inch Bench Grinder, 2) 31-inch Flex Shaft, 3) Wrench 4) 3-inch Grinder Stone, 5) 3-inch Fiber Wheel, 6) 1/8 inch Mounting Stone Bit If any parts are missing or broken, please call Harbor Freight Tools at the number on the cover of this manual. SKU 43533 Page 4...
Secure the Flexible Shaft (32) to the Wheel Cover (14). (37) Align and insert the shaft. It can only go in one way. Tighten the Flexible Shaft Connector Nut (37) over the Wheel Cover. Flexible Shaft (32) SKU 43533 Page 5...
Page 6
If you are using an “inline” dresser, hold the handle firmly, put the dresser on the tool rest so that its wheels can move freely (i.e., the exposed part of the wheel should be facing up). Let the wheel reach full speed and apply the dresser evenly to all surfaces. SKU 43533 Page 6...
TECHNICIANS AND NOT BY THE BUYER. THE BUYER ASSUMES ALL RISK AND LIABIL- ITY ARISING OUT OF HIS OR HER REPAIRS TO THE ORIGINAL PRODUCT OR REPLACE- MENT PARTS THERETO, OR ARISING OUT OF HIS OR HER INSTALLATION OF REPLACE- MENT PARTS THERETO. SKU 43533 Page 7...
Assembly Drawing NOTE: Some parts are listed and shown for illustration purposes only and are not available individually as replacement parts. SKU 43533 Page 8...