Removing Bridge Adapter Screws And Emi Gasket - HP 744 Hardware User Manual

Figure 2-9
9 Remove the four screws from bridge adapter VME connectors, as shown
in Figure 2-9.
10 Using a small screwdriver or razor, remove the copper EMI gasket on the
front bezel of the bridge adapter, as shown in Figure 2-9.
Bridge Adapter
Front Bezel
EMI gasket

Removing Bridge Adapter Screws and EMI Gasket

PMC Bridge Adapter and Expansion Adapter
Bridge Adapter
VME Connectors
Installing Accessories
Screws (4)
2-19