Bottom Cover - HP 210 G1 Maintenance And Service Manual

Bottom cover

Description
Touchscreen models (includes left and right corner covers)
Non-touchscreen computer models (includes left and right corner covers)
Before removing the bottom cover, follow these steps:
1. Turn off the computer. If you are unsure whether the computer is off or in Hibernation, turn the
computer on, and then shut it down through the operating system.
2. Disconnect the power from the computer by unplugging the power cord from the computer.
3. Disconnect all external devices from the computer.
4. Remove the battery (see
5. Remove the service door (see
6. Disconnect the RTC battery cable from the system board (see
7. Remove the display assembly (see
NOTE: When replacing the bottom cover, be sure that the RTC battery is removed from the
defective bottom cover and installed in the replacement bottom cover.
Remove the bottom cover:
1. Release the zero insertion force (ZIF) connector (1) to which the keyboard cable is attached, and
then disconnect the keyboard cable from the system board.
2. Release the ZIF connector (2) to which the TouchPad button board cable is attached, and then
disconnect the TouchPad button board cable from the system board.
Battery on page 40).
Service door on page
Display assembly on page
41).
RTC battery on page
53).
Component replacement procedures
Spare part number
730887-001
747750-001
47).
61